Polyester Surface Mat/Tissue
Product Description
The product provides good affinity between the fiber and the resin and allows the resin to penetrate quickly, reducing the risk ofproduct delamination and the appearance of bubbles.
Product Characteristics
1. wear resistance；
2. corrosion resistance；
3. UV resistance；
4. Mechanical damage resistance；
5. Smooth surface；
6. Simple and fast operation；
7. Suitable for direct skin contact；
8. Protect the mold during produce；
9. Saving coating time；
10. Through osmotic treated, no risk of delamination.
Technical Specifications
| Product code | Unit weight | Width | length | processes | ||||||||
| g/㎡ | mm | m | ||||||||||
| BHTE4020 | 20 | 1060/2400 | 2000 | spunbond | ||||||||
| BHTE4030 | 30 | 1060 | 1000 | spunbond | ||||||||
| BHTE3545A | 45 | 1600/1800 2600/2900 | 1000 | spunlace | ||||||||
| BHTE3545B | 45 | 1800 | 1000 | spunlace | ||||||||
Packaging
Each roll is wound onto a paper tube.Each roll is wrapped up in plastic film and then packed in acardboard box.The rolls are stacked horizontally or vertically onto pallets The specific dimension and packaging method shall be discussed anddetermined by the customer and us.
Storge
Unless otherwise specified, the fiberalass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10°~35° and <80%respeclively,To ensure safety and avoid damage to the product. the pallets should be stacked not more than threelayers high. When the pallets are stacked in two or three layers, special cares hould be taken to correctly and smoothly move the upper pallet.
