Pet Polyester Film
Product Description
PET polyester film is a thin film material made of polyethylene terephthalate by extrusion and bidirectional stretching.PET film (Polyester Film) is used successfully in a wide range of applications, due to its excellent combination of optical, physical, mechanical, thermal, and chemical properties, as well as its unique versatility.
Product Characteristics
1. High temperature,easy processing,good resistance to voltage insulation.
2. Excellent mechanical properties,rigidity,hardness and toughness,puncture resistance,abrasion resistance,high temperature and low temperature.Resistant to chemicals,oil resistance,air tightness and good fragrance,is commonly used barrier composite film substrate.
3. Thickness of 0.12mm,commonly used for cooking packaging outer layer of printing is better.
Technical Specifications
| Thickness | Width | Apparent density | Temperature | Tensile strength | Elongation at breaking | Thermal shrinkage rate | |||||||||
| μm | mm | g/cm3 | ℃ | Mpa | % | (150℃/10min) | |||||||||
| 12-200 | 6-2800 | 1.38 | 140 | ≥200 | ≥80 | ≤2.5 | |||||||||
Packaging
Each roll is wound onto a paper tube.Each roll is wrapped up in plastic film and then packed in acardboard box.The rolls are stacked horizontally or vertically onto pallets The specific dimension and packaging method shall be discussed anddetermined by the customer and us.
Storge
Unless otherwise specified, the fiberalass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10°~35° and <80%respeclively,To ensure safety and avoid damage to the product. the pallets should be stacked not more than threelayers high. When the pallets are stacked in two or three layers, special cares hould be taken to correctly and smoothly move the upper pallet.
