-
Glass, carbon and aramid fibers: how to choose the right reinforcement
The physical properties of composite materials are dominated by fibers. This means that when resin and fibers are combined, their properties are very similar to those of individual fibers. Test data show that fiber-reinforced materials are the components that carry most of the load. Therefore, fa...Read more -
The main material difference between fiberglass cloth and glass
Fiberglass gingham is an untwisted roving plain weave, which is an important base material for hand-laid fiberglass reinforced plastics. The strength of the gingham fabric is mainly in the warp and weft direction of the fabric. For occasions requiring high warp or weft strength, it can also be wo...Read more -
Combining carbon fiber and engineering plastics to develop advanced CFRP materials to meet automotive lightweight solutions.
Lightweight and high-strength carbon fibers and engineering plastics with high processing freedom are the main materials for next-generation automobiles to replace metals. In a society centered on xEV vehicles, CO2 reduction requirements are more stringent than before. In order to address the iss...Read more -
The world’s first 3D printed fiberglass swimming pool
In the United States, most people have a swimming pool in their yard, no matter how big or small, which reflects an attitude to life. Most traditional swimming pools are made of cement, plastic or fiberglass, which are usually not environmentally friendly. In addition, because labor in the countr...Read more -
Why are glass fibers drawn from glass fusion flexible?
Glass is a hard and brittle material. However, as long as it is melted at high temperature and then quickly drawn through small holes into very fine glass fibers, the material is very flexible. The same is glass, why is the common block glass hard and brittle, while the fibrous glass is flexible...Read more -
【 Fiberglass 】What are the commonly used reinforcing materials in the pultrusion process?
The reinforcing material is the supporting skeleton of the FRP product, which basically determines the mechanical properties of the pultruded product. The use of the reinforcing material also has a certain effect on reducing the shrinkage of the product and increasing the thermal deformation temp...Read more -
【Information】There are new uses for fiberglass ! After the fiberglass filter cloth is coated, the dust removal efficiency is as high as 99.9% or more
The fiberglass filter cloth produced has a dust removal efficiency of more than 99.9% after film coating, which can achieve ultra-clean emission of ≤5mg/Nm3 from the dust collector, which is conducive to the green and low-carbon development of the cement industry. During the production process ...Read more -
Take you to understand fiberglass
Fiberglass has many advantages such as high strength and light weight, corrosion resistance, high temperature resistance, and good electrical insulation performance. It is one of the commonly used composite materials. At the same time, China is also the world’s largest producer of fibergla...Read more -
Properties and Applications of Fiberglass for Reinforcing Composite Materials
What is fiberglass? Fiberglass are widely used due to their cost-effectiveness and good properties, mainly in the composites industry. As early as the 18th century, Europeans realized that glass could be spun into fibers for weaving. Fiberglass have both filaments and short fibers or flocs. Glas...Read more -
Strengthens building material strength without the need for rebar ARG Fiber
ARG Fiber is a glass fiber with excellent alkali resistance. It is commonly mixed with cements for materials used in building construction and civil engineering. When used in glass fiber reinforced concrete, ARG Fiber—unlike rebar—does not corrode and reinforces with a uniform distribution throug...Read more -
Common problems and solutions of carbon fiber composite pultrusion
The pultrusion process is a continuous molding method in which the carbon fiber impregnated with glue is passed through the mold while curing. This method has been used to produce products with complex cross-sectional shapes, so it has been re-understood as a method suitable for mass production a...Read more -
High-performance vinyl resin for ultra-high molecular weight fiber pultrusion
The three major high-performance fibers in the world today are: aramid fiber, carbon fiber, and ultra-high molecular weight polyethylene fiber, and ultra-high molecular weight polyethylene fiber (UHMWPE) has the characteristics of high specific strength and specific modulus. Performance composite...Read more
