Manufacturer for Fiberglass Pot - 3D FRP Sandwich Panel – Beihai Fiberglass
Manufacturer for Fiberglass Pot - 3D FRP Sandwich Panel – Beihai Fiberglass Detail:
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process).
Advantage
●Fully Fashioned.
●Panel face is very beautiful,
●High strength.
●One-time finishing, slove the problem of traditional sandwich panel foaming.
Structure chart
If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, and the density will not be consistent. The strength of the panel will be very low.
The largest width is 1500mm, you can choose the different foam, such as PU,PVC and so on. The PVC foam strength is higher than PU, the price is also higher. The PU foam thinnest is 5mm,the PVC foam thinnest is 3mm.The normal size is 1200x2400mm, for the normal panel choose the PU foam(density 40kg/m3) +two sides combo mat or woven roving, the total thickness is 20mm.
Application
Benefits of RTM
| The benefits of RTM | What does it bring you? |
| Product surface will be fully defined during pressing | Low finishing costs and beautiful quality |
| Large mould freedom and high fibre-volume(up to 60%) | Ultimate mechanic properties |
| Constant Reproducible | Low dropout rate and suited for advanced applications |
| Continuous innovative industrialisation | Cost savings, higher tool capacity |
| Closed mould technique | Barely any emissions and operator friendly |
Product detail pictures:
Related Product Guide:
Our rewards are lower costs,dynamic profits team,specialised QC,potent factories,high-quality services for Manufacturer for Fiberglass Pot - 3D FRP Sandwich Panel – Beihai Fiberglass , The product will supply to all over the world, such as: Greece, Jakarta, Malta, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We will not live up to the historic opportunity of the times.
By Marguerite from Auckland - 2017.10.27 12:12
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Ivy from Finland - 2017.05.21 12:31
