Hydrophobic Precipitated Silica
Product Introduction
Precipitated silica is further divided into traditional precipitated silica and special precipitated silica. The former refers to silica produced with sulfuric acid, hydrochloric acid, CO2 and water glass as the basic raw materials, while the latter refers to silica produced by special methods such as supergravity technology, sol-gel method, chemical crystal method, secondary crystallization method or reversed-phase micelle microemulsion method.
Product Specifications
|
Model No. |
Silica content % |
Drying reduction % |
Scorch reduction % |
PH value |
Specific surface area (m2/g) |
oil absorption value |
Average particle size (um) |
Appearance |
|
BH-1 |
98 |
2-6 |
2-5 |
6.0-9.0 |
120-150 |
2.0-2.8 |
8-15 |
White powder |
|
BH-2 |
98 |
3-7 |
2-6 |
6.0-9.0 |
120-150 |
2.0-2.8 |
5-8 |
White powder |
|
BH-3 |
98 |
2-6 |
2-5 |
6.0-9.0 |
120-150 |
2.0-2.8 |
5-8 |
White powder |
Product Application
BH-1 ,BH-2, BH-3 are widely used in solid and liquid silicone rubber, sealants, adhesives, paints, inks, resins, defoamers, dry powder fire extinguishers, lubricating grease, battery separators and other fields. It has good reinforcing, thickening, easy dispersion, good thixotropy, defoaming, anti-sedimentation, anti-fluxing, anti-caking, anti-corrosion, wear-resistant, high temperature resistant, anti-scratch, good handfeel, flow-assisting, loosening and so on.
Packaging and Storage
- Packaged in multiple layer kraft paper,10kg bags on pallet.Should be stored in the original packaging in dry
- Protected from volatile substance
