China Hot New Products 3d Fiberglass Cloth - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

Hot New Products 3d Fiberglass Cloth - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Fiberglass E Glass Woven Roving 200gsm, E-Glass, Outdoor Large Flower Pot, We warmly welcome customers, business associations and friends from all over the world to contact us and seek cooperation for mutual benefits.

Hot New Products 3d Fiberglass Cloth - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

We have now our possess revenue group, design staff, technical crew, QC team and package group. We now have strict excellent regulate procedures for each process. Also, all of our workers are experienced in printing subject for Hot New Products 3d Fiberglass Cloth - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Greenland, Florida, Georgia, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.

3d E Glass Fabric

3d Glass Fiber

Fiber Glass Planter

Flower Garden Pots

Flush Fiberglass Door

Glass Fiber Plastic

Glass Fiber Reinforced

Multiaxial Fabric

Plant Pot

Triaxial Fabric

The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.

By Janice from Colombia - 2018.11.04 10:32

The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.

By Carey from Algeria - 2017.06.22 12:49

Write your message here and send it to us