-
Factory Free sample E-Glass Fiber - 3D FRP Sandwich Panel – Beihai Fiberglass
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process). Advantage ●Fully Fashioned. ●Panel face is very beautiful, ●High strength. ●One-time finishing, slove the problem of traditional sandwich panel foaming. Structure chart If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, an... -
PriceList for Glass Fiber Plastic - 3D FRP Panel with resin – Beihai Fiberglass
The 3-D Fiberglass Woven fabric can composite with different resins(polyester,Epoxy,Phenolic and etc), then the final product is 3D composite panel. Advantage 1. light weight bur high strength 2. Great resistance against delamination 3. High design – versatility 4. Space between both deck layers can be multifunctional(Embedded with sensors and wires or infused with foam) 5. Simple and effective lamination process 6. Heat insulation and sound insulation, Fireproof, Wave transmittable Applicati... -
China wholesale Activated Carbon Fiber Cloth - Activated Carbon Fiber-Felt – Beihai Fiberglass
Active carbon fiber felt is made of natural fiber or artificial fiber non-woven mat through charring and activation. The main component is carbon, piling up by carbon chip with big specific surface-area(900-2500m2/g), pore distribution rate ≥ 90% and even aperture. Compared with granular active carbon, the ACF is of bigger absorbing capacity and speed, easily regenerate with less ash, and of good electric performance, anti-hot, anti-acid, anti-alkali and good at forming. Feature ●Acid and alk... -
Hot sale Frp Flower Pot - FRP sheet – Beihai Fiberglass
FRP Sheet FRP sheet is made of thermosetting plastics and reinforced glass fiber, and its strength is greater than that of steel and aluminum. The product will not produce deformation and fission at ultra-high temperature and low temperature, and its thermal conductivity is low. It is also resistant to aging, yellowing, corrosion, friction and easy to clean. Features High mechanical strength and good impact toughness; Roughness surface and easy to clean; Corrosion resistance, wear resistance... -
Excellent quality S-Glass - 3D FRP Sandwich Panel – Beihai Fiberglass
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process). Advantage ●Fully Fashioned. ●Panel face is very beautiful, ●High strength. ●One-time finishing, slove the problem of traditional sandwich panel foaming. Structure chart If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, an... -
Super Lowest Price Fiberglass Spray Up Roving - E-glass Assembled Roving For Spray up – Beihai Fiberglass
E-glass Assembled Roving For Spray up Assembled Roving for spray-up is compatible with UP and VE resins. It delivers properties of low static, excellent dispersion, and good wet out in resins. Features ●Low static ●Excellent dispersion ●Good wet-out in resins Application It covers a wide range of applications: bathtub, FRP boat hulls, various pipes, storage vessels and cooling towers. Product List Item Linear Density Resin Compatibility Features End Use BHSU-01A 2400, 4800... -
Reasonable price Fiberglass Reinforced Mat - Triaxial Fabric Longitudinal Triaxial(0°+45°-45°) – Beihai Fiberglass
Triaxial Series Longitudinal Triaxial (0°/ +45°/ -45°) At most three layers of roving can be stitched, however a layer of chopped strands（0g/㎡-500g/㎡） or composite materials can be added. The maximal width can be 100 inches. Structure Application Transverse triaxial combo mat is used in blades of wind power turbines, boat manufacturing and sports advices. Product List Product No Overall density 0°roving density +45°roving density -45°roving density Chop density ... -
Good User Reputation for Fiberglass Sheeting Panels - 3D FRP Sandwich Panel – Beihai Fiberglass
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process). Advantage ●Fully Fashioned. ●Panel face is very beautiful, ●High strength. ●One-time finishing, slove the problem of traditional sandwich panel foaming. Structure chart If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, an... -
PriceList for Fiber Glass Pots - 3D FRP Sandwich Panel – Beihai Fiberglass
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process). Advantage ●Fully Fashioned. ●Panel face is very beautiful, ●High strength. ●One-time finishing, slove the problem of traditional sandwich panel foaming. Structure chart If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, an... -
Big Discount Fiber Glass Powder - 3D Fiberglass Woven Fabric – Beihai Fiberglass
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction. Product Characteristics The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced. The range of the pillar height:3-50 mm, the range of the width:≤3000 mm. The designs of structure ... -
Well-designed Fancy Flowers Pot - 3D Inside Core – Beihai Fiberglass
The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board. Advantage Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP). With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect buildin... -
2021 China New Design 3d Woven Glass Fiber Fabric - 3D FRP Sandwich Panel – Beihai Fiberglass
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process). Advantage ●Fully Fashioned. ●Panel face is very beautiful, ●High strength. ●One-time finishing, slove the problem of traditional sandwich panel foaming. Structure chart If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, an...
