Factory Promotional Fiberglass Entry Doors - 3D FRP Panel with resin – Beihai Fiberglass
Factory Promotional Fiberglass Entry Doors - 3D FRP Panel with resin – Beihai Fiberglass Detail:
The 3-D Fiberglass Woven fabric can composite with different resins(polyester,Epoxy,Phenolic and etc), then the final product is 3D composite panel.
Advantage
1. light weight bur high strength
2. Great resistance against delamination
3. High design – versatility
4. Space between both deck layers can be multifunctional(Embedded with sensors and wires or infused with foam)
5. Simple and effective lamination process
6. Heat insulation and sound insulation, Fireproof, Wave transmittable
Application
Specification
| Pillar Height | mm | 4.0 | 6.0 | 8.0 | 10.0 | 12.0 | 15.0 | 20.0 | |
| Warp Density | root/10cm | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Weft Density | root/10cm | 96 | 96 | 96 | 96 | 96 | 96 | 96 | |
| Face Density | 3-D spacer fabrics | kg/m2 | 0.96 | 1.01 | 1.12 | 1.24 | 1.37 | 1.52 | 1.72 |
| 3-D spacer fabrics and sandwich construction | kg/m2 | 1.88 | 2.05 | 2.18 | 2.45 | 2.64 | 2.85 | 3.16 | |
| Flatwise Tensile Strength | MPa | 7.5 | 7.0 | 5.1 | 4.0 | 3.2 | 2.1 | 0.9 | |
| Flatwise Compressive Strength | MPa | 8.2 | 7.3 | 3.8 | 3.3 | 2.5 | 2.0 | 1.2 | |
| Flatwise Compressive modulus | MPa | 27.4 | 41.1 | 32.5 | 43.4 | 35.1 | 30.1 | 26.3 | |
| Shear Strength | Warp | MPa | 2.9 | 2.5 | 1.3 | 0.9 | 0.8 | 0.6 | 0.3 |
| Weft | MPa | 6.0 | 4.1 | 2.3 | 1.5 | 1.3 | 1.1 | 0.9 | |
| Shear modulus | Warp | MPa | 7.2 | 6.9 | 5.4 | 4.3 | 2.6 | 2.1 | 1.8 |
| Weft | MPa | 9.0 | 8.7 | 8.5 | 7.8 | 4.7 | 4.2 | 3.1 | |
| Bending Rigidity | Warp | N.m2 | 1.1 | 1.9 | 3.3 | 9.5 | 13.5 | 21.3 | 32.0 |
| Weft | N.m2 | 2.8 | 4.9 | 8.1 | 14.2 | 18.2 | 26.1 | 55.8 | |
Note: The above performance index for information purposes only, based on the user’s performance requirements, 3D spacer fabric reinforcement structure can be designed.
Product detail pictures:
Related Product Guide:
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Factory Promotional Fiberglass Entry Doors - 3D FRP Panel with resin – Beihai Fiberglass , The product will supply to all over the world, such as: Estonia, Barcelona, Bandung, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
By Jessie from Grenada - 2018.10.01 14:14
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Cora from San Diego - 2018.12.25 12:43
Write your message here and send it to us
